Important! This page contains older software for both FM and AM versions of the Omnia-5.

For FM software, click here.

For AM software, click here.

Omnia-5FM Software for older versions

Before Downloading: The remote control software operates ONLY with specific versions of Omnia-5FM software. Before downloading, confirm your software version by choosing "System --> About" from the control menu. 

Omnia strongly recommends keeping your Omnia-5FM software current. Please contact Omnia Support to obtain the latest software upgrade. 

Omnia-5FM Remote is for use with Omnia-5FM audio processors only. Remote software for other Omnia processors can be found here.

Omnia-5FM Front Panel Update FP5.06 and
Omnia-5FM Remote Software v 5.0.2

Omnia-5EX front-panel software may now be updated using an Ethernet connection. 

Before Downloading: Please read our tech bulletin, Omnia Front Panel Software Upgrade. Follow the instructions outlined in this document; if you have questions, please contact Omnia Support.

Front Panel Software Update:

Once you have read the update instructions, download upd_omn5.06.zip . Unzip the file and follow the instructions in the Omnia Front Panel Software Upgrade blletin to update your unit.

Remote Control Software Update:

Before Downloading: This version of remote software works with with front panel software version FP5.06, and rear panel (DSP) software version 5.0.2 only. Before downloading, confirm your software version by choosing "System --> About" from the control menu. Your software version should read "5.0.2". To obtain the latest software update, please contact Omnia Support.

Installation Instructions:

1. Click Here and download the .EXE file to your local computer into your chosen directory.

2. Double click omnia5_remote_5.0.2.exe. Follow the instructions in the Omnia Users Manual for operating the Remote Software.

3. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords.

4. Default password for Level 3 is engineer.

This version of Omnia-5 Remote is for use with Omnia-5 FM audio processors only. Remote software for other Omnia processors can be found here.

Omnia-5FM Remote for v5.0.1 software

Confirm your software version by choosing "System --> About" from the control menu. If your software version reads "5.0.1" , this software is correct for your unit. 

Installation Instructions:

1. Click Here and download the .EXE file to your local computer into your chosen directory.

2. Double click o5remote_5.01.exe. Follow the instructions in the Omnia Users Manual for operating the Remote Software.

3. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords.

4. Default password for Level 3 is engineer.

 

Omnia-5AM Software For Older Versions

Before Downloading: The remote control software operates ONLY with specific versions of Omnia-5AM software. Before downloading, confirm your software version by choosing "System --> About" from the control menu. 

Omnia strongly recommends keeping your Omnia-5AM software current. Please contact Omnia Support to obtain the latest software upgrade. 

Omnia-5AM Remote is for use with Omnia-5AM audio processors only. Remote software for other Omnia processors can be found here.

Omnia-5AM Front Panel Update v FP5.1.0
Omnia-5AM Remote Software v 5.1.0

Omnia-5EX AM front-panel software may now be updated using an Ethernet connection. 

Before Downloading: Please read our tech bulletin, Omnia Front Panel Software Upgrade. Follow the instructions outlined in this document; if you have questions, please contact Omnia Support.

Front Panel Software Update:

Once you have read the update instructions, download omn_5_AM_upd_5.1.0.zip . Unzip the file and follow the instructions outlined above to update your unit.

This front panel version must be used with Omnia-5 EX or EXi "rear panel" Release software v5.1.0.

If your unit is running earlier Release software, please contact Omnia Support to obtain a free PCMCIA update card.

Remote Control Software Update:

Before Downloading: This version of remote software works with with software version FP5.1.0 only. Before downloading, confirm your software version by choosing "System --> About" from the control menu. Your software version should read "5.1.0". To obtain the latest software update, please contact Omnia Support.

Installation Instructions:

1. Click Here and download the .EXE file to your local computer into your chosen directory.

2. Double click omn_remote_5.1.0.exe. Follow the instructions in the Omnia Users Manual for operating the Remote Software.

3. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords.

4. Default password for Level 3 is engineer.

This version of Omnia-5 Remote is for use with Omnia-5 AM audio processors only. Remote software for other Omnia processors can be found here.