Omnia-5FM, -5AM EX, -5AM EXi
Software v5.2.1

Software for older Omnia-5 AM and FM software versions: click here. 

Beginning with v5.2.1, Omnia-5 software no longer has distinct versions for AM and FM processors. The same "smart" update file will work with all versions of Omnia-5.

Omnia-5 font-panel software may be updated using an Ethernet connection. To make things easier for you, we are now distributing both the update package and appropriate remote software in a single ZIP file.

Before Downloading: Please read our tech bulletin, Omnia Front Panel Software Upgrade. Follow the instructions outlined in this document; if you have questions, please contact Omnia Support.

Once you have read the update instructions, download omn5hd_5_2_1.zip . Unzip the .UPD and Remote .EXEfiles to your computer's desktop and follow the instructions found in the Omnia Front Panel Software Upgrade bulletin to update your unit.

You can then Double click omn_remote_5_2_1.exe to run the remote program:

1. Follow the instructions in the Omnia Users Manual for operating the Remote Software.

2. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords. 

3. Default password for Level 3 is engineer.

Remember: This version of remote software works with with front panel software version FP5.2.1, and rear panel (DSP) software version 5.2.1 only. Before downloading, confirm your software version by choosing "System --> About" from the control menu. Your software version should read "5.2.1". To obtain the latest software update, please contact Omnia Support.

Omnia-5 Remote is for use with Omnia-5 audio processors only. Remote software for other Omnia processors can be found here