Omnia-4.5 Remote Software 

Before Downloading: The remote control software operates ONLY with specific versions of Omnia-6 software. Before downloading, confirm your software version by choosing "System --> About" from the control menu. 

Omnia strongly recommends keeping your Omnia-4.5 software current. Please contact Omnia Support to obtain the latest software upgrade. 

Omnia-4.5 Remote is for use with Omnia-4.5 audio processors only. Remote software for other Omnia processors can be found on their specific product pages.

Omnia-4.5 Remote for v4.01.01 and newer software

Confirm your software version by choosing "System --> About" from the control menu. If your software version reads "4.1.1" (this is not a typographic error) or higher, this software is correct for your unit. 

Installation Instructions:

1. Click Here and download the .EXE file to your local computer into your chosen directory.

2. Double click o45remote4.00.19.exe and follow the instructions.

3. Follow the instructions in the Omnia Users Manual for operating the Remote Software.

4. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords.

5. Default password for Level 3 is engineer.

Omnia-4.5 Remote for v4.01.00 and older software

Confirm your software version by choosing "System --> About" from the control menu. If your software version reads "4.1.0" (this is not a typographical error) or lower, this software is correct for your unit. 

Installation Instructions:

1. Click Here and download the .EXE file to your local computer into your chosen directory.

2. Double click o45remote4.00.16.exe and follow the instructions.

3. Follow the instructions in the Omnia Users Manual for operating the Remote Software

4. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords.

5. Default password for Level 3 is engineer.